Description
Easy repair:
This set contains all the products you need to repair damage to your motorbike caused by a fall.
- 1 x dasAuto acrylic base coat spray paint
- 1 x 2K clear lacquer
- 1 x Filler primer
- 1 x plastic primer
- 1 x fine filler
- 1 x silicone remover
- 1 x Handle
- 1 x masking tape 3M 19 mm
- 2 x 3M P320 wet sandpaper
- 2 x 3M P500 wet sandpaper
- 2 x 3M P800 wet sandpaper
Instructions for use:
Tips and tricks
Before using the spray can, carefully read and follow the safety instructions!
Surface preparation:
Thoroughly clean the car body of dirt, grease and dust.
Remove any rust.
The surface must be sanded, clean, dry and free of grease.
Apply primer. Once dry, sand briefly (P600 sandpaper).
Painting:
Shake the spray paint well for approx. 3 minutes before use. The spray distance should be approx. 25 cm. Spray several thin layers at intervals of 3 minutes.
.
